BTQZG - MIL-P-23377E EPOXY POLYAMIDE PRIMER (COMP A & B)
- MSDS: BTQZG
- Manufacturer: KOPPERS CO INC
- Product Name: MIL-P-23377E EPOXY POLYAMIDE PRIMER (COMP A & B)
- National Stock Number: 8010-00-935-7080
Product Identification
Product ID:MIL-P-23377E EPOXY POLYAMIDE PRIMER (COMP A & B)
MSDS Date:07/27/1988
FSC:8010
NIIN:00-935-7080
Kit Part:Y
MSDS Number: BTQZG
Responsible Party
PITTSBURGH, PA 15219
US
Emergency Phone: 800-553-5631 OR 800-323-6571
Info Phone: 412-227-2000
Preparer: NONE
Cage: KOPPE
Contractor
Telephone: 800-556-7737
Cage: 85663
Ingredients
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
OSHA PEL 200 PPM
ACGIH TLV: 200 PPM/300STEL 9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
OSHA PEL 200 PPM; Z-2
ACGIH TLV: S, 50 PPM; 9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ISOPROPANOL (ISOPROPYL ALCOHOL) (SARA III)
CAS: 67-63-0
RTECS: NT8050000
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM/500STEL;9394
STRONTIUM CHROMATE (SARA III)
CAS: 7789-06-2
RTECS: GB3240000
OSHA PEL C 0.1 MG (CRO3)/M3
ACGIH TLV: 0.0005MG(CR)/M3;A294
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
PROPYLENE GLYCOL MONOMETHYL ETHER
CAS: 107-98-2
RTECS: UB7700000
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM/150STEL;9394
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT) IS UNKNOWN.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:ACUTE: IRRITATING TO EYES, NOSE AND
THROAT FROM VAPORS. HIGHER CONCENTRATIONS CAUSE RESPIRATORY TRACT
IRRITATION, HEADACHE, DROWSINESS, DIZZINESS, FATIGUE, NAUSEA,
COLLAPSE. CHRONIC: NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: IRRITATION. INHALATION:
RESPIRATORY TRACT IRRITATION, HEADACHE, DROWSINESS, DIZZINESS,
FATIGUE, NAUSEA, COLLAPSE. INGESTION: GASTROINTESTINAL IRRITATION,
ABDOMINAL PAIN, NAUSEA , VOMITING, DIARRHEA, EFFECTS SIMILAR
TOINHALATION.
Medical Cond Aggravated by Exposure:PERSON WITH PRE-EXISTING DISEASE
INVOLVING EYES, SKIN, RESPIRATORY TRACT, KIDNEY, LIVER, BONE
MARROW, BLOOD CELLS, CNS ARE AT GREATER THAN NORMAL RISK OF ADVERSE
EFFECTS WHEN EXPOSED TO THIS PRODUCT.
First Aid
First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER. GET MEDICAL
ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING. WASH AREA WITH SOAP
AND WATER. IF IRRITATION PERSISTS, GET MEDICAL ATTENTION.
INHALATION: MOVE TO FR ESH AIR. IF NOT BREATHING, GIVE CPR.
IFBREATHING DIFFICULT, GIVE OXYGEN. GET MEDICAL ATTENTION.
INGESTION: DO NOT INDUCE VOMITING. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:TCC
Flash Point:23.0F,-5.0C
Extinguishing Media:DRY CHEMICAL, CARBON DIOXIDE, FOAM, WATER SPRAY.
WATER MAY BE INEFFECTIVE.
Fire Fighting Procedures:WEAR COMPLETE FIRE SERVICE PROTECTIVE
EQUIPMENT, FULL-FACE MSHA/NIOSH APPROVED SCBA. USE WATER TO COOL
FIRE-EXPOSED CONTAINER, STRUCTURE, PROTECT PERSONNEL.
Unusual Fire/Explosion Hazard:VAPORS FORM EXPLOSIVE MIXTURE IN AIR.
VAPORS HEAVIER THAN AIR, MAY TRAVEL TO DISTANT IGNITION SOURCE AND
FLASHBACK. CLOSED CONTAINER MAY RUPTURE IN HIGH HEAT.
Accidental Release
Spill Release Procedures:AVOID BREATHING VAORS. REMOVE ALL SOURCES OF
IGNITION. VENTILATE AREA. CONTAIN AND SCOOP UP SPILL WITH
NON-SPARKING TOOLS OR RAGS. USE INERT ABSORBENT ON SMALL SPILLS OR
ON RESIDUALS OF LARGE SPILLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, WELL VENTILATED AREA
AWAY FROM FLAMES, WELDING, SMOKING, SPARKS, OPEN LIGHTS. KEEP
CONTAINERS CLOSED AND UPRIGHT TO PREVENT LEAKAGE.
Other Precautions:AVOID BREATHING VAPORS OR SPRAY MIST. AVOID EYE AND
SKIN CONTACT. DO NOT USE PRESS TO EMPTY DRUMS.
Exposure Controls
Respiratory Protection:IF VENTILATION DOES NOT MAINTAIN EXPOSURE BELOW
PEL(TLV), USE MSHA/NIOSH APPROVED UNITS PER CURRENT 29CFR1910.134.
Ventilation:PROVIDE ADEQUATE MECHANICAL (GENERAL)/LOCAL EXHAUST
VENTILATION IN VOLUME AND PATTERN TO CONTROL EXPOSURE BELOW
PEL/TLV.
Protective Gloves:INDUSTRIAL RESISTANT FLEXIBLE-TYPE.
Eye Protection:INDUSTRIAL SAFETY GLASSES.
Other Protective Equipment:WEAR INDUSTRIAL TYPE WORK CLOTHING AND
SAFETY FOOTWEAR.
Work Hygienic Practices:WASH AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
THIS PRODUCT IS A TWO COMPONENT COATING. ANY MIXTURE OF COMPONENT A & B
WILL HAVE HAZARDS OF BOTH COMPONENTS. DATA SUPPLIED IS BASED ON
MIXTURE OF THE TWO CONPONENTS.
Chemical Properties
HCC:F2
Vapor Density:>1
Spec Gravity:8.6-9.4 LBS/GAL
Evaporation Rate & Reference:>1 (BUTYL ACETATE=1)
Solubility in Water:MODERATELY
Appearance and Odor:YELLOW COLORED LIQUID. STRONG SOLVENT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID OXIDIZING AGENTS, HYDROFLUORIC ACID, ALKALI, REDUCING AGENTS,
STRONG ACIDS.
Stability Condition to Avoid:EXCESSIVE TEMPERATURES, OPEN FLAMES,
SPARKS, OTHER SOURCES OF IGNITION.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:US EPA DEFINED IGNITABLE HAZARDOUS WASTE.
DISPOSE OF AS AN IGNITABLE WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.